Biomek i7 Hybrid NGS Workstation Enclosed

C23339


The Biomek i7 Hybrid NGS Workstation is an ideal platform for automating NGS sample prep workflows including steps from extraction through library contruction, qPCR, normalization and pooling. Flexibility and efficiency are maximized with both multi-channel and Span 8 pipetting on board. In addition, standard on-deck process control elements such as shakers, peltiers and optional thermocyclers, enable medium to high-throughput laboratories significant reductions in hands-on time while also increasing throughput, productivity, efficiency. The industry leading The Biomek i7 Hybrid NGS Workstation is an ideal platform for medium to high-throughput laboratories looking to automate NGS sample prep workflows including all steps involved from extraction through library construction. Multi-channel and Span 8 pipetting are included to maximize flexibility and efficiency for full and partial plate processing. Standard on-deck process control elements such as shakers, peltiers and optional thermocyclers, enable significant reductions in hands-on time while also increasing throughput, productivity, efficiency. The industry leading Biomek software provides technology that enables Beckman Application Scientists and customers to create simple, yet comprehensive methods with unmatched intelligence and flexibility. A repository of demonstrated1 (definition of demonstrated as a footnote on the page) NGS methods (hyperlink italicized text to Demonstrated Biomek Methods Card) is available. Each method comes standard with intuitive User Interfaces and tools like Deck Optix(TM) (hyperlink to Deck Optix) to better ensure accurate setup and reduce costly errors.

Especificaciones

Minimum Table Support Requirements #N/A / #N/A
Platform Biomek 4000
Pod and Tool Type 1μL - 300 μL 96-Channel head; 5 μL -1200 μL 96-Channel Head; 0.5 μL - 60 μL Multichannel-384 Head; Span-8 Pod
Environmental Conditions Up to 2000 m
Installation Category II
Power Requirements 100-240 VAC, 50/60 Hz, 10 A
Operating System Windows® 10
Software SAMI EX scheduling software, Biomek PowerPack software, Biomek Method Launcher, DART 2.0 software, Biomek software
Display 22" controller screen
Operating Mode(s) Semi-automated, manual, controlled by operator
Autoclavable No
Material(s) ABS Cover, Acrylic panels, Aluminum chassis
Finish High-gloss paint, Hardcoat anodized coating
Weight 260 kg / 573.2 lb
Width 170 cm / 66.9 in
Depth 81 cm / 31.9 in
Height 112 cm / 44.1 in
Package Quantity 1
Temperature Range 10° C - 30°C
Humidity Restrictions 20%-85% relative humidity (non-condensing)
Customers Also Viewed

NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS

The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.