500mL HarvestLine System Liners, Non-sterile, qty 6
Superior labware is only the beginning when it comes to obtaining extraordinary results in the lab. Safe, efficient workflows are as critical to your work as quality samples. Now you can safely harvest high-quality samples in fewer steps from prep to cleanup with Beckman Coulter’s HARVESTLINE bottle liners.
HarvestLine System Liners; For Use In High-Performance Rotors:JA-10, JLA-10.500, JLA-8.1000, JLA-9.1000, JS-5.2, JS-4.3, JS-4.2, JS-4.2A, JS-4.0, JS-3.0 and Benchtop Rotors:JS-4.750, GH-3.8, SX-4750, SX-4750A; Liner for Bottles: PC-500 Polycarbonate Bottle with Screw-On Cap (Part Number 355664), PC-500 Polycarbonate Bottle with O-ring Knurled Cap (Part Number 361690), PC-500 Polycarbonate Bottle with Insert & Screw-On Cap (Part Number 355605), PP-500 Polypropylene Bottle with Screw-On Cap (Part Number 355665), PP-500 Polypropylene Bottle with O-ring Kunrled Cap (Part Number 361691), and PP-500 Polypropylene Bottle with Insert & Screw-On Cap (Part Number 355607).
|Application Uses||Bacterial cell pelleting, Clarification of tissue homogenates|
|Nominal Size||500.00 mL|
|Environmental Conditions||Preferred storage environment is ambient|
|Rotor Product Line||Avanti - Rotor|
|Rotor Compatibility||Compatible with JA-10, JLA-10.500, JLA-8.1000, JLA-9.1000, JS-5.2, JS-4.3, JS-4.2, JS-4.2A, JS-4.0, JS-3.0 high-performance rotors and JS-4.750, GH-3.8, SX-4750, SX-4750A benchtop centrifuges. Use as liner for PC-500 polycarbonate bottle with screw-on cap (Part Number 355664), PC-500 polycarbonate bottle with o-ring knurled vap (Part Number 361690), PC-500 polycarbonate bottle with insert & screw-on cap (Part Number 355605), PP-500 polypropylene bottle with screw-on cap (Part Number 355665), PP-500 polypropylene bottle with o-ring kunrled cap (Part Number 361691), and PP-500 bolypropylene bottle with insert & screw-on cap (Part Number 355607).|
NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES
PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS
The listed regulatory status for products correspond to one of the below:
IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use."
ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagents. Analytical and performance characteristics are not established."
CE: Products intended for in vitro diagnostic use and conforming to European Directive (98/79/EC). (Note: Devices may be CE marked to other directives than (98/79/EC)
RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures."
LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only."
No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.